K-1259
K-2860

Park Tool - Replacement Jaw Covers For Repair Stand

Regular price$31.90
/
Tax included.

PARK TOOL - REPLACEMENT JAW COVERS FOR REPAIR STAND

Replacement jaw covers for most Park Tool stands, for full information on clamp covers click here:

MICRO-ADJUST CLAMPS:

  • K-1960 (2010-):
    The 1960 fits the jaws clamp used on the PRS-25, as well as the 100-3D and 100-5D clamps, as featured on our PCS-4, PRS-2.3, PRS-3.3, PRS-4.2, PRS-4W, PRS-7 and PRS-33.2. The covers are nominally 7cm long.

HOME MECHANIC REPAIR STANDS:

  • K-2860 (2019-):
    The 2860 fits the jaws on the PCS-9.2, PCS-9.3, PCS-10.2, and PCS-10.3. 2860 jaw covers are almost the exact same shape as the 1960, but thicker, enabling these home mechanic repair stands to clamp tubes as small as 7/8". 
    The covers are nominally 7cm long.
  • K-1185K (2004-2018):
    The 1185K fits the clamp jaws on the PCS-9, PCS-10, PCS-11 and PCS-12 repair stands. The covers are nominally 9cm long.
     

ADJUSTABLE/SPRING LINKAGE CLAMPS:

  • K-468B (CURRENT MODEL):
    468B are the current clamp covers for the 100-3C, 100-5C, 100-8C, 100-8Y and 100-9C clamps. These are the “standard shop” clamps found on such models as the PRS-2, PRS-2 OS, PRS-2.2, PRS-2.3, PRS-3, PRS-3 OS, PRS-3.2, PRS-3.3, PRS-4, PRS-4 OS, PRS-4.2, PRS-7, PRS-5 and PCS-4. The covers are nominally 10cm long.
  • K-468G (PCS-1 & PCS-2):
    The 468G fit the clamps of the 100-1C, 100-1CA, and 100-2C. These were the clamps on the final generation of the PCS-1. Jaw covers are colored gray. The covers are nominally 10cm long. NOTE: Use care not to confuse the 468G with the 467G jaw covers. The two are not interchangeable.
  • K-467B (PRS-3 & PRS-2 - SINGLE CABLE RELIEF):
    The 467B fits older 100-3C, 100-5C and 100-8C clamps. These older generation clamps were used on older shop stands such as the PRS-3 and PRS-2. The covers are nominally 10cm long.
  • K-467G (PCS-1 - SINGLE CABLE RELIEF):
    The 467G fits the clamps of the older versions of the 100-2C clamps. These were the clamps of the early generation of the PCS-1. The covers are nominally 10cm long.

 

EXTREME RANGE CLAMPS:

  • K-1259 (2004-2015):
    The 1259 fits the clamp jaws of the 100-4X, 100-6X, 100-7X, and 100-15X (used on the PRS-15). The cover is held in place by two studs protruding through the clamps. The studs are held with clips. The covers are nominally 9cm long.
  • K-1002 (2001-2003):
    The 1002 fits the clamp jaws on the 100-3X and 100-5X extreme range clamps. The cover is held in place by two studs protruding through the clamps. The studs are held with clips. The covers are nominally 9cm long.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.